Retail and metering
In this section
Metrology Procedures and Unmetered LoadsNational Electricity Market (NEM) metrology procedure
The metrology procedure is made in accordance with clause 7.14 of the National Electricity Rules (the Rules), and is comprised of two parts:
- Metrology Procedure: Part A National Electricity Market.
- Metrology Procedure: Part B: Metering Data Validation, Substitution and Estimation Procedure for Metering Types 1–7.
The metrology procedure applies to AEMO, registered participants, metering providers, and metering data providers, in relation to connection points in the NEM that may be classified as a first-tier load, second-tier load, market load, or intending load, in accordance with clause 2.3.1 of the Rules.
The metrology procedure provides information on the application of metering installations to connection points, and sets out provisions for metering installations and metering data services.
Current version: Effective from 15 May 2015
Metrology Procedure: Part A v5.30
13 May 2015 | filesize: 896 kB (.pdf)
Metrology Procedure: Part B v5.30
13 May 2015 | filesize: 999 kB (.pdf)
Metrology Procedure: Part A v3.20
1 March 2014 | filesize: 980 kB (.pdf)
Metrology Procedure: Part B v5.20
1 March 2014 | filesize: 859 kB (.pdf)NEM unmetered loads
In accordance with Table S188.8.131.52, Item 5(c) of the Rules, the metrology procedure must include arrangements for unmetered loads that have been classified as market loads. Consequently, the metrology procedure requires AEMO to publish:
- The NEM Load Table, which lists the load values for unmetered market load.
- A Guideline, to provide industry with assistance in determining the device load values for an unmetered market load device.
Unmetered loads that are not included in the NEM Load Table (that is, off-market unmetered loads) are the subject of arrangements determined through consultation between LNSPs, FRMPs (typically Local Retailers), interested parties and end-use customers.
National Electricity Market Load Tables for Unmetered Connection Points
NEM Load Tables for Unmetered Connection Points
02 February 2017 | filesize: 930 kB (.pdf)
Unmetered Load Guideline
Unmetered Load Guideline v1.0 Final Determination - Clean
3 April 2014 | filesize: 475 kB (.pdf)First-tier jurisdictional requirements publication
In accordance with clause 11.20.6 of the Rules, AEMO must, in consultation with the participating jurisdictions, publish a document (‘first-tier jurisdictional requirements publication’) that lists the documents that contain the applicable jurisdictional requirements referred to in clauses 11.20.2, 11.20.3 and 11.20.4 of the Rules.
First-tier Jurisdictional Requirements Publication