The NEM load table consists of device load values or annual energy consumptions for devices that have been classified as market loads, as agreed between a Minister and AEMO, and can be used with unmetered market connection points within the NEM. These device load values are used in the algorithm that produces calculated metering data for unmetered market loads.

Under clause 14.2.4(f) of Metrology Procedure: Part B, AEMO must develop and publish a Guideline to provide industry with assistance in determining the device load or annual energy consumption of an unmetered device to support proposals to modify the NEM load table.

Matter Under Consultation.

This consultation on the Unmetered Load Guideline was undertaken to develop and publish the initial version of a Guideline to provide industry with assistance in determining the device load or annual energy consumption of an unmetered device to support proposals to modify the NEM Load Table.

This consultation was conducted under clause 14.2.4(f) of Metrology Procedure: Part B and in accordance with the National Electricity Rules (Rules) consultation requirements detailed in clause 8.9 of the Rules

The consultation has now been completed, and AEMO has published the Final Determination and Report.

Effective date of the Unmetered Load Guideline is 3 April 2014.

The following documentation is provided for this Final Determination Stage of Consultation:

• Unmetered Load Guideline - Final Determination and Report
• Unmetered Load Guideline – Clean version
 

Final Determination and Report

Second Stage Consultation

Initial Consultation Participant Responses

Initial Stage Consultation

For further information please contact David Ripper, Senior Metrology Engineer, david.ripper@aemo.com.au