Update to NEM load table (Unmetered Loads) – current proposals

Proposal to Update NEM Load Table (Unmetered Loads)

Following the migration from the Jurisdictional Metrology Procedures to the NEM Metrology Procedure, the obligation to update and publish the Load Tables for Type 7 Metering Installations (NEM Load Table) lies with AEMO.

The NEM Load Table sets out the power consumption values for each unmetered device type.  These power consumption values are used in the algorithm that calculates metering data for unmetered loads in the NEM.

As per clause 12.1.4(d) of the NEM Metrology Procedure Part B AEMO is required to:

  • Consider and publish proposals to add an unmetered device type to the NEM Load Table.
  • Take into account the views of interested parties to determine whether to add an unmetered device type to the NEM Load Table.

The following process will be used to amend the NEM Load Table:

  • Publish the supporting documentation for the proposed new unmetered device load value on the AEMO website for comment and agreement by industry.
  • Period for comments on the proposed unmetered device load value will be 20 business days.
  • In the absence of any comments that dispute these proposals, AEMO will take the proposed load for the unmetered device type as agreed.
  • The new unmetered device load value agreed and published in the NEM Load Table may only be used exactly as tested.
  • The new unmetered device load value agreed and published can be used in all NEM jurisdictions that have declared street lights as market loads.

AEMO invites comment as to the acceptance of this new unmetered device load value into the NEM Load Table as per clause 12.1.4(d) of the NEM Metrology Procedure Part B.

LPE Group Park 30W and Promenade 20W LED Luminaires

LPE Group has applied to have its Park 30W and Promenade 20W LED Luminaires added to the NEM Load Table as an unmetered device and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
ALL LPE Group Park Post Top 30W LED Luminaire 30.1W
ALL LPE Group Promenade M 20W LED Luminaire 20.3W

 

AEMO has considered the LPE Group’s proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The LPE Group’s proposal, including supporting test results, technical summary and letter from City of Salisbury supporting the inclusion of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au

Date of publication: 25 November 2021.

Reponses to be submitted by no later than 23 December 2021.

Signify Australia Tango BVP LED Floodlights (4)

Signify Australia has applied to have its Tango BVP LED Floodlights added to the NEM Load Table as an unmetered device and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
ALL Signify Australia Tango BVP383 LED130 100W Floodlight 106.7W
ALL Signify Australia Tango BVP384 LED472 360W Floodlight 365.8W
ALL Signify Australia Tango BVP383 LED260 200W Floodlight 205.9W
ALL Signify Australia Tango BVP381 LED65 50W Floodlight 53.8W

 

AEMO has considered the Signify Australia proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The Signify Australia proposal, including supporting test results, technical summary and letter from Ausgrid supporting the inclusion of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au.

Date of publication: 18 November 2021.

Reponses to be submitted by no later than 16 December 2021.

Signify Australia BRP471 and BRP472 LED Luminaires

Signify Australia has applied to have its BRP471 and BRP472 LED Luminaires added to the NEM Load Table as an unmetered device and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
ALL Signify Australia BRP471 LED64/NW 50W LED Luminaire 50W
ALL Signify Australia BRP471 LED102/NW 78W LED Luminaire 78.4W
ALL Signify Australia BRP472 LED189/NW 144W LED Luminaire 140W
ALL Signify Australia BRP472 LED303/NW 236W LED Luminaire 228.5W

 

AEMO has considered the Signify Australia proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The Signify Australia proposal, including supporting test results, technical summary and letter from Ausgrid supporting the inclusion of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au.

Date of publication: 18 November 2021.

Reponses to be submitted by no later than 16 December 2021.

Sylvania-Schreder Avenue II/Bourke Hill II LED Luminaires

Sylvania-Schreder has applied to have its Avenue II/Bourke Hill II LED Luminaires added to the NEM Load Table as unmetered devices and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
ALL Sylvania-Schreder Avenue II/Bourke Hill II 14W
ALL Sylvania-Schreder Avenue II/Bourke Hill II 18W
ALL Sylvania-Schreder Avenue II/Bourke Hill II/B2001 II  17W
ALL Sylvania-Schreder B2001 II 28W 27.8W

 

AEMO has considered the Sylvania-Schreder proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The Sylvania-Schreder proposal, including supporting test results, technical summary and letter from Energy Queensland supporting the installation of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au.

Date of publication: 18 November 2021.

Reponses to be submitted by no later than 16 December 2021.

WE-EF Lighting VLR130 48LED Luminaire

WE-EF Lighting has applied to have its VLR 48LED Luminaire added to the NEM Load Table as an unmetered device and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
 ALL WE-EF Lighting VLR130 48LED Luminaire 33.8W


AEMO has considered the WE-EF proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The WE-EF proposal, including supporting test results, technical summary and letter from Transport Canberra & City Services (ACT)Energy supporting the inclusion of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au

Date of publication: 4 November 2021.

Reponses to be submitted by no later than 3 December 2021.

Streetworx OzLite LED13 Luminaire

Streetworx has applied to have its OzLite LED13 Luminaire added to the NEM Load Table as an unmetered device and has proposed the following amendment to the NEM Load Table:

Jurisdiction Submitted by Unmetered Device Load as tested (W)
 ALL Streetworx OzLite LED13 Luminaire 13W


AEMO has considered the Streetworx proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.

The Streetworx proposal, including supporting test results, technical summary and letter from United Energy supporting the inclusion of this device are published on this web page.

Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au

Date of publication: 4 November 2021.

Reponses to be submitted by no later than 3 December 2021.

X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm